After 12 years of loyal service, we have decided to turn the page and refocus on other activities. The site is now closed, it is no longer possible to place orders.

Thank you all for your loyalty! May the light be with you!

LED Tube for Light Graff

New

With this LED tube, the LightGraff becomes a cinch! Its beam is both powerful, wide and perfectly homogeneous. 4 lighting modes, 3 white (100%, 50%, 25), and a red SOS.

  • 19 cm
Add to compare Add to my wishlist

Basically, this product is intended to stay warm in your car, to serve as a safety lamp. We though it could do a lot more... and since we received it, we are convinced!

Very light (100g), the tube is held easily in the hand. On one side is the connector that will allow you to recharge it on a USB. On the other side, two buttons, one to power on the tube, the other to change modes.

 

Main characteristics

  •  Three white modes: 100%, 50%, 25%
  •  SOS mode: Red flashing.
  •  1600mAh Li-Ion Battery.
  •  The rear part of the tube is magnetized.
  •  Recharge by USB cable (supplied)

 

 Benefits

Perfect for LighGraff
Perfect for LighGraff This is the main reason we selected this product, we do not regret! The width and uniformity of the beam actually facilitates the graff. No need to tinker for hours to assemble neon battery, everything is already there. Use is also very intuitive.
Useful for stencils
The beam width can be filled very easily large areas and thus to achieve buffers or light stencils.
Easy to customize
The format of the lamp makes it possible to easily integrate color films to create totally custom color effects. Depending on how you will achieve them, it is even possible to interchange quickly.
Magnetic
It's the little extra that makes quite a difference: the metal part at the back is magnetized. While indeed it is extremely convenient for DIY, but it also allows to fix the tube quickly on any metal surface, a bike, a car ...
Autonomy
Displayed with a 4h autonomy to 100%, 8h at 50% or in SOS mode, you are not ready to crash. An autonomy that also allows to use it as inspection lamp between shots, which is reassuring.
Solid and reliable
It really felt like we gave this despite some pretty hectic evenings, it does not move, we just trust him.

 

 Our recommendation...

Add with this lamp with a set of 12 filters for Flash. A small piece of tape to mount it as cylinders and go for smooth and colorful effects.

 

Pack Contents:

  •  1x LED Tube 19 or 23cm.
  •  1x Hand Strap.
  •  1x Vertical support.
  •  1x USB charging cable.
ColorsWhite 100% / 50%, 25%, Red SOS
Power1W / 2W
ControlOn/Off Switch
ConnectorsUSB
Number of CellsLi-Ion 3.7V / 1600mAh
Cells IncludedYes - Batteries are included
Weight100g
FinishAluminium
Size30 x 190mm / 30 x 230mm
CompatibilityUniversal
No customer comments for the moment.

Write a review

LED Tube for Light Graff

LED Tube for Light Graff

With this LED tube, the LightGraff becomes a cinch! Its beam is both powerful, wide and perfectly homogeneous. 4 lighting modes, 3 white (100%, 50%, 25), and a red SOS.

Write a review

3W 10 Colors RGB LED FlashLight
Try it and adopt it !! Rugged, compact and very powerful (3W), this flashlight offers 10 colors in 4 lighting modes (continuous, rapid flash, slow flash, fade).
MicroLED Kit - 6 Colors
Simple, compact and efficient, the MicroLED color is ideal for light painting. it slips into any pocket and with it's ring, you can attach it anywhere.
Kit Paint Bar RGB
At last the perfect solution to make LightPainting with LED strips! The RGB Paint Bar kit includes everything you need to get started with RGB Paint Bars!
12 Color Filters for Flashs
An extremely simple and effective system to change the color of your flash. Including 12 color filters and their support with Velcro, this system is completely universal and will fit on any flash.

Best Sellers

Scroll To Top